rhenus FU 52 TD is a special EP coolant for the machining of aluminium and particularly of stain-sensitive aluminium alloys, as well as for steel, stainless steel, non-ferrous metals and cast iron materials. The EP additives also allow difficult machining operations to be carried out, such as the cutting of titanium alloys or the forming of galvanised parts.
rhenus FU 52 TD
Water-miscible metalworking fluids
rhenus FU 52 TD is a water-miscible, mineral oil-based EP coolant. It is free of amines and boric acid.
Editing
Reaming (with HSS)
Sawing
Scalping
Deep drilling
Turning
Gear hobbing
Milling
Thread cutting/thread forming
Broaching
Drilling
Reaming (with carbide metal)
Bitte wählen Sie die Gebindegröße aus:
Request nowDescription
Rhenus FU 52 TD
Application
Advantages
- No staining of delicate aluminium alloys
- Excellent lubricating and cutting effect
- Low discharge losses
- Long emulsion life
- Good skin compatibility
- Suitable for systems with a high biological load
DIN ISO 513
Properties
- Amine-free
- Boron-free
- Whitish, very finely dispersed emulsion
- Water hazard class 1
- Suitable for the following machining methods: drilling, turning, milling, reaming (with HSS/carbide metal), scalping, sawing, gear hobbing, thread cutting/thread forming, broaching, deep drilling
Technical data
Refer to our technical data sheet for more information about this product.
Similar products
Impuls News
Here you’ll find information on current topics relating to the industry and lubricants.
rhenus TY 155 L: the right choice for people and machinery alike
Reading Time:
5 Min.
Rhenus Lub at the IZB
Reading Time:
2 Min.
Let´s talk at the LUBRICANT EXPO
Reading Time:
2 Min.
The favourite for aviation: Airbus approval for rhenus TU 560 metalworking fluid
Reading Time:
5 Min.
