rhenus FU 760 is used for very heavy-duty machining operations on tough and difficult-to-machine materials. At the same time, the coolant can be used for the machining of steel, stainless steel and hardened steel.
Start / Productfinder / rhenus FU 760
rhenus FU 760
Water-miscible metalworking fluids
rhenus FU 760 is a water-miscible, mineral oil-based EP coolant. Free of boric acid and amines, it offers maximum cutting performance.
Editing
Milling
Thread cutting/thread forming
Broaching
Gear hobbing
Reaming (with carbide metal)
Reaming (with HSS)
Sawing
Scalping
Drilling
Deep drilling
Turning
Package sizes:
Request nowDescription
Rhenus FU 760
Application
Advantages
- Excellent tool service life
- Low discharge losses
- Good demulsifying behaviour
- Long emulsion life
- Low-foaming
- Good skin compatibility
DIN ISO 513
Properties
- Amine-free
- Boron-free
- High level of EP additives
- Finely dispersed emulsion
- Water hazard class 1
- Suitable for the following machining methods: drilling, turning, milling, reaming (with HSS/carbide metal), scalping, sawing, gear hobbing, thread cutting/thread forming, broaching, deep drilling
Technical data
Refer to our technical data sheet for more information about this product.
Similar products
Impuls News
Here you’ll find information on current topics relating to the industry and lubricants.

CoolantsPress release
The favourite for aviation: Airbus approval for rhenus TU 560 metalworking fluid
Reading Time:
6 Min.
09.05.2022

CoolantsPress release
Bombardier aviation approval for high-performance metal working fluid rhenus FU 70 W
Reading Time:
5 Min.
12.08.2021

ExpertiseLubricating greasesGlossaryGeneral
Thickeners as a component of lubricating greases
Reading Time:
7 Min.
03.08.2021