rhenus UA 18 M enables the machining of high-alloy, tough steels, e.g. ball bearing steels, high-temperature, austenitic steels, very strong steels. Steels with low carbon content that tend to smear can be machined with this cutting oil.
rhenus UA 18 M
Non-water-miscible metalworking fluids
rhenus UA 18 M is a yellow, clear, chlorine-free, low oil mist highperformance EP cutting oil.
Editing
Deep drilling
Drilling
Turning
Milling
Thread cutting/thread forming
Gear hobbing
Broaching
Reaming (with carbide metal)
Reaming (with HSS)
Sawing
Scalping
Bitte wählen Sie die Gebindegröße aus:
Request nowDescription
rhenus UA 18 M
Application
Advantages
- Low oil mist levels
- No fusing of roughness peaks
- When stored temporarily: Corrosion protection
DIN ISO 513
Properties
- Yellow, clear colour
- Chlorine free
- Water hazard class 1
- GHS08
- Suitable for the following machining methods: drilling, turning, milling, reaming (with HSS/carbide metal), scalping, sawing, gear hobbing, thread cutting/thread forming, broaching, deep drilling
Approvals
rhenus UA 18 M has been approved by Safran Group for use in the aviation industry.
Technical data
Refer to our technical data sheet for more information about this product.
Similar products
Impuls News
Here you’ll find information on current topics relating to the industry and lubricants.
rhenus TY 155 L: the right choice for people and machinery alike
Reading Time:
5 Min.
Rhenus Lub at the IZB
Reading Time:
2 Min.
Let´s talk at the LUBRICANT EXPO
Reading Time:
2 Min.
The favourite for aviation: Airbus approval for rhenus TU 560 metalworking fluid
Reading Time:
5 Min.
